Wireless Intelligent PIR roof motion detector

DIY to play access code.Including Alkaline dry battery NO."6F22"，9V. various types to select,transmitting distance ≤200m. cover area:360
Adopting advanced digital signal processing technology, Compounding
of high precision passive infrared detector and logical digital circuit
design, feature intelligent power save, auto- tamperature
compensation, low battery alarm and so on. It emits wireless digital
signal to start the control panel for alarm through detecting human
being body infrared heat. Nice looking, Reliable and fine quality.It can
be compatible with many other control panel.

FUNCTION
1. Tamper switch: it will send alarm signal if cover is disassembled
2. Preset coding with the control panel: Switch the protection zone to
ON, press the tamper switch and send wireless signal, the control
panel sounds, it means that coding is completed matched.(refer to the
coding program of control panel operation instruction and relative
detector)
3. Low battery alarm: when battery is low voltage, the human being
body moving, LED flashes five times. In static environment,it is not
activated.
4. Coding address: preset by manufacture or by user.
5.Protected time choosing: 3 seconds or 30 seconds, it is preset by
playing pins.
6. Compatible with many control panel.
(3)SPECIFICATION
Power supply: 9VDC Li-ion & manganese battery 500mAh
Working current: static Wireless parameter: frequency 315MHz or 433MHz, Transmitting
distance >150 m
(wide area without interfere)
Detecting range: high 2.4m from ground, covered diameter:7.3m, high
4.5m, covered diameter: 9m
Working condition: working tamperature: -10ºC~55ºC
Product size: Φ96*25mm
(4) INSTALLATION.
1, Installing guide
Open the cover, connect the battery, than the detector starts to work.
Press tamper switch to transmit the signal to match coding of the
control panel Close the cover, when installing it, please learn the
following diagram.When the power is on, the LED flashes for about two
seconds, the detector will continues to delay for about three seconds
or thirty seconds (it depends on protecting time choosing),than it
enters the activate situation. If intruder enter protection area.
The detector immediately sends out wireless alarm signal.
2. Usage
Walk test: to set the protecting time choosing to 3 seconds by playing
pin, simulated as intruder go into the protection area, the LED flashes
for about 2 seconds, the detector sends out the wireless signal,
meanwhile, the control panel should receive the signal. After walk test,
it tested well, please set the protecting time choosing to 30 seconds
so as to start to work.
Note: When setting the protecting time, please shut off battery power
and press tamper switch once.
(5) CAUTION
Install the detector to the proper place where intruder must enter.
Do not face the detector to any area where window, lamp-house,heat
thing and so on.It is used for indoor,not for outdoor.When installing, do
not drop down or hit the detector so to avoid the internal infrared
sensor.Do not touch the sensor lens so to avoid the detecting distance
and sensitivity.Have termly walk test。
Remarks: Delivery time:2~5days after payment confirmation.
Mini order: 500units of (combined available) alarm system
Payment term: FOB Shenzhen, T/T in advance or irrevocable L/C at sight,Western union
Sample cost to be negotiable, Usually sent by TNT,DHL,EMS,FEDEX,UPS
International Standard met: CE
Possiblity of customers' design: Packing,brand.etc. OEM, ODM.
"Warranty policy ：Standard factory hardware warranty（12 All ATS equipment is shipped with a standard factory warranty of 12 months. During this period, ATS will do all repairs free of charge (material and labor). The faulty parts or units have to be shipped freight prepaid to a ATS regional service center. ATS will pay the freight charges when the repaired parts are shipped back to the customer''s site. Damage of equipment due to improper use is not covered by this warranty.）
，Extended hardware warranty ，Warranty on repairs ，Software warranty .
"
1CTN :10sets of standard alarm system package. Carton size:53*35*41cm
The standard package:door sensor "ATS-11", common detector "ATS-81", Need extra more,please add i

Ralated Keywords: wireless lan card wireless weighing scale wireless pci adapter wireless cellular repeaters wireless products roof hardware

Didn't find what you're looking for? Do you want to search more Wireless Intelligent PIR roof motion detector ATS-86 products?

Do you want view original page?

shenzhen autosecu technology co., ltd.continues to be the premier resource for security alarms worldwide. ats''s dedication to exploring new territories, developing new products, reducing costs, seeking answers to environmental issues and continuously improving our worldwide customer service will keep ats well positioned to continue to service retail and security manufacturing communities well into the 21st century.
since 1998 shenzhen autosecu technology co., ltd. has been producing a...more>>