WHEEL LOADER (CLG862)

WHEEL LOADER
Model No.: CLG862 MAIN FEATURES: 1. Excellent productivity.
2. Powerful breakout & traction force.
3. Advanced full hydraulic steering system with flow amplified.
4. ZF transmission & converter with starting protected, neutral gear locked and KD function.
5. Axles with limited slip differential locks.
MAIN PARAMETERS: ENGINE: Model: CUMMINS 6CTA8.3-C240
Type: in line, water-cooled, 4 cycle, direct injection, turbocharged diesel engine
Rated power: 179 kw (240 HP) / 2200 rpm
Peak torque: 1017 Nm / 1500 rpm
Displacement: 8.3 L
Cylinders-bore x stroke: 6-114 x 135 mm
Fuel consumption: 231 g/kw.h TRANSMISSION: Model of transmission: ZF 4WG200
Type of transmission: counter shaft-type power shift, semi-automatic electrical hydraulic shifting control
Pressure of transmission (gear pump): 1.6-1.8 Mpa
Type of converter: single-stage, single-phase, three elements torque converter
Torque ratio: 2.55
Cooling system: forced circulation by centrifugal pump, pusher type fan TRAVEL SPEED: Forward: I: 0-6 km/h; II: 0-11 km/h; III: 0-23 km/h; IV: 0-36 km/h;
Reverse: I: 0-6 km/h; II: 0-11 km/h; III: 0-23 km/h; STEERING SYSTEM: Type: articulated frame, full hydraulic power with flow amplified system, full-flow filtering
Steering angle, each direction: 38 degree with 1 degree more or less
Setting pressure: 17.5 Mpa
Flow: 127 L/min / 2200 rpm
Steering cylinder-bore x stroke: 2-90 x 486 mm
Steering pump: P5100-F100NP3676 gear pump AXLES: Model: Liugong series axles
Type: self-locking differentials and wet multi-disc brakes
Type of major speed reducer for driving axle: spiral bevel, 1-stage reduction
Speed ratio of major speed reducer: 4.625
Type of speed reduction on wheel for driving axle: 1-stage planetary reduction
Speed ratio of speed reduction on wheel: 5.294
Speed reduction ratio: 24.485 BRAKE SYSTEM: Type of brake system: full hydraulic wet-disc braking
Service brake: all wheels wet multi-disc brakes
Parking brake: shoe-type brake, operator applies electronic-control
Emergent brake: using parking brake, the brake will automatically/manually apply. Equipped with braking low-pressure warning and flameout emergency braking warning. HYDRAULIC SYSTEM: Relief valve setting: 20.7 Mpa
Hydraulic cycle time, rated load in bucket (in second): raise: 6.5; dump: 1.5; lower (empty, float down): 3.0; total: 11
Lift cylinder-bore x stroke: 2-180 x 740 mm
Tilt cylinder-bore x stroke: 1-200 x 556 mm
Working pump: P7100-F100
Flow: 262.5 L / 2100 r/min CAPACITY: Fuel tank: 320 L
Crankcase: 22 L
Torque converter / transmission: 45 L
Differentials and final drives: front: 45 L; rear: 50 L
Hydraulic tank: 210 L TIRES: Type: 23.5-25-20PR
Front wheel air pressure: 0.425 + or - 0.01 Mpa
Rear wheel air pressure: 0.375 + or - 0.01 Mpa OVERALL DATA: Operating weight: 19000 + or - 500 kg
Bucket capacity: 3.5 cubic meter
Rated load: 6000 kg
Traction force: 171.3 kN
Gradient: 30 degree
Breakout force: 198 kN
Static tipping load (full 38 degree turn): 124 kN
Static tipping load (straight): 141 kN
Ground clearance: 431 mm
Length from centerline of front axle: 1675 mm
Wheelbase: 3350 mm
Max. rollback at full height: 62 degree
Bucket dump at full height: 45 degree
Dump reach: 1200 mm
Hinge pin height at full lift: 4306 mm
Dump height: 3200 mm
Max. rollback at ground: 44 degree
Hinge pin height at carry position: 550 mm
Max. digging depth: 97 mm
Width over tires: 2800 mm
Tread width: 2200 mm
Turning radius outside tires: 5964 mm
Max. steering angle (each side): 38 degree
Bucket width: 3006 mm
Turning radius outside bucket: 6991 mm OVERALL DIMENSIONS: Overall length: 8480 mm
Overall width: 3006 mm
Overall height: 3467 mm STANDARD EQUIPMENT: CUMMINS 6CTA8.3-C240 engine; ZF 4WG200 transmission; automatic bucket leveler; ROPS/FOPS cab; general bucket; pilot control; Liugong series axles; lift kick-out system; air conditioner; back-up alarm.
OPTIONAL EQUIPMENT: wheel loader scale; centralized automatic lubricating system.

Ralated Keywords: wheel spanner wheel incising machine diamond cup wheel furniture caster wheel scooter wheel rim cutting wheel machine

Didn't find what you're looking for? Do you want to search more WHEEL LOADER (CLG862) products?

Do you want view original page?

tianjin henglida construction machinery import and export co., ltd. is a specialized international trading company in line of construction, mining, lifting machineries. our mission is to help clients all over the world to seek appropriate equipments from china, and to make their purchase much easier and faster.
our advantage is to cooperate with the best chinese manufacturers of diversified equipments, and all the equipments we recommended are of the top level in the aspects of...more>>