variable-speed tubing pump

Stackable 1/4-DIN housing is made of ABS plastic. Mount in your equipment rack or place on your lab bench. To mount, order brackets separately at right.
Separate single-turn speed control and cw/off/ccw switch with green LED power indicator. Maintain speed setting when you turn pump on/off or reverse direction.
Reversible permanent magnet DC motor; purge fluid before or after pumping; pump fluid in either direction.
Remote control connections are on the back of the pump; start/stop pump with a contact closure.
ax?button runs pump at 100% of maximum rpm. Use to prime or to rapidly flush tubing.
Tubing retainers are built into the pump head to firmly grip the tubing. Change tubing quickly and easily by releasing tubing retainers.
Pump head is constructed from polyphenylene sulfide (PPS), stainless steel (SS), and features acetal co-polymer rollers. PPS and SS promote longer life and the six roller construction provides a low-pulsation flow.
Pump head has average fixed occlusion for tubing o need to adjust occlusion after each tubing change.
Maximum suction lift of 5 ft (1.5 m); maximum discharge head of 20 ft (6.1 m); maximum pressure 15 psi (1.0 bar). Self priming pump can withstand minor back pressure.
Pump accepts all sizes of microbore tubing and includes 5-ft (1.5-m) of 0.89 mm ID TYGON LFL tubing. Order additional microbore tubing based on flow rate (see below).
Dual-voltage (90 to 260 VAC) benchtop power supply included. Power supply is UL- and CSA-approved.
6-ft (1.8-m) power cord.
This pump is identical to the dual-channel C/L models except it is single channel and provides a higher flow rate. Ideal for chromatography, spectroscopy, and dispensing application

Ralated Keywords: glass tubing bathroom tubing copper tubing brass tubing tubing pump motor pump

Didn't find what you're looking for? Do you want to search more variable-speed tubing pump products?

Do you want view original page?