FM Radio Flashlight(Zhejiang Sorbo Electronic Co., Ltd. (Shenzhen Branch)),china supplier,exporter,China

Product Info

FM Radio Flashlight

Minimum order:	1000 Piece/Pieces
Standard:	100000 Piece/Pieces per Day
Terms of Payment:	L/C,T/T

Description:

Working Principle:
This product adopts the principle of cranking for power by 3 brushless generator which after commutating and filtering to charge its built-in 80 mAh/3.6V Ni-MH chargeable battery, the energy stored is used as the power source of LED and FM/AM radio; The radio circuit adopts the specified radio CMOS chip CD2003 to realize FM/AM radio function, the wave band can be changed by the AM/FM switch, mechanical tuning and speaker output.Functions:
1.Cranking to charge the built-in 80mAh/3.6V Ni-MH chargeable battery.
2.Three lighting model: 1 LED lighting, 3 LEDs lighting, 3 LEDs flashing.
3. FM/AM radio function.Features:
1. 3 brushless generator to crank for power, low noise and high efficiency.
2. High sensitive FM and AM radio, speaker and earphone output, the volume is adjustable.
3. Controlled by electronic switch , long life-span .
4. Convenient for using , never need battery , cranking to generate power .
5. Delicated sculpt , novelty and fashion .Main Technical Parameters:
ItemParameterUnitItemParameterUnit
The Max. brightnessThe Max. Luminous flux
1 LED lights11000Mcd1 LED lights1Lm
3 LEDs light30000Mcd3 LEDs light2.7Lm
Working time after 1 minute cranking
1 LED light60Minute Receive scope of the FM (Frequency modulation)87-108/
76-91 MHZ
3 LEDs light40MinuteReceive scope of the AM (Frequency modulation)530-1600
KHZ
3 LEDs flash60Minute Sensitive degree of the FM15 uV
FM radio(comfortable)8MinuteSensitive degree of the AM3 mV/m
Working time after being charged fullyLED lifetime50000Hour
1 LED lights5.5Hour Switch lifetime100000Times
3 LED light3.5Hour Flash frequency2HZ
3 LEDs flash5.5Hour The plastic part lifetime5 Year
FM radio(comfortable)55Minute The whole unit lifetime5Year
Operation Method:
1> Lighting:
1. Unlock the handle, hold the unit with one hand and crank the handle with the other at the speed of 3 circles per second for about 1 minute, press the switch, the light will be on.
2. The switch model: press for the first time, the LED in middle is on ; press for the second time, 3 LEDs are on ; press for the third time, 3 LEDs flash ; press once more, 3 LEDs are off.
2> Radio:
1. Pull out the collapsible radio mast, turn the volume knob clockwise, when you hear a crack sound, it means the radio is working now.
2. Put the FM/AM switch to the wave band which you want to listen to, then turn the tuning knob to search stations. If the signal is weak, you can change the position of the antenna for FM and change the position of the product for AM.
3. Volume adjusting: Turn the volume knob clockwise to amplify the volume, contrariwise, the volume is decreased.
4. Turn off the radio: Turn the radio switch anticlockwise to the end, when you hear a crack sound, it means the radio is off.Cautions:
1. Dont point the light to anyones eyes in case of hurting the eyes.
2. Crank it as even as possible (keep rotating steady). Too slowly cranking would make the current weak and prolong the charging time, and too violent or quick cranking will possibly damage the driving system .
3. Pay attention to the holding gesture when cranking so as not to hurt your fingers.
4. In order to ensure the batterys using life, do not crank it for power continuously for more than 3 minutes when its power is adequate (light normally) and less than 10 minutes when it is deficient.
5. In order to prolong the batterys using life, crank it at least once a month for more than 1 minute .
6. Avoid places like high building, basement, etc as possible as you can when listening to the radio, such places will badly influence the effect of the reception.
7. Do not place this product in where temperature or humidity is high .Size: 146*57*55 mm
Weight: 214 g FM Radio Flashlig

Product List

Zhejiang Sorbo Electronic Co., Ltd. (Shenzhen Branch)

Home > Products> FM Radio Flashlight

FM Radio Flashlight