YK523 mining machine is a kind of stone material that our company has developed production recently to process the equipment.This machine is used in the stone panel and excavate the oval or whole round hole mainly, make the hard work that is engaged in excavating the hole by hand for a long time liberated out, raise labour productivity , promote processing quality that mine, for make dish is it throw deeply processed process do spade work to rub. Especially suitable for producing by batch. Machine this job aircraft nose under direction , job of template , make from all angles is it turn to pace up and downing around axis, pace up and down and transfer to the frequency conversion of the speed controlling, the aircraft nose goes up and down and automaticallies control, cutting the depth can be adjusted , finish cutting the automatic back tracking. It is simple for the aircraft nose to operate, easy to use.
Technical data
Saw the rotational speed of the electric axle6400r/minAperture of the saw22.2mm
Rotational speed of the main shaft0.7-1.4r/minAperture of the template100mm
The axle of the saw rotates the angle25��Dig the largest diameter of headRound��580mm
Axle centre-to-centre spacing mesa of the sawthe biggest 340mm Minimum 0Dig the largest diameter of headEllipse shapeLong , short , axle a,b��290mm
The axle is one slice of diameters105-110Size of the workingbench1200mm��780mm
Total capacity of installation2.02KWSize of appearance1230��1200��1830mm YK523 Mining machine
mo

Do you want view original page?